Construction Of Hot Rolled Z Steel Sheet Pile Price Preferential Quality Of High Buildings
The production process of hot-rolled Z-shaped steel sheet piles usually includes the following steps:
Raw material preparation: First, raw materials need to be prepared, usually using high-quality steel as raw materials. These steels need to be inspected and classified to ensure they meet production requirements.
Heating and rolling: The raw materials are heated to bring them to the appropriate temperature and then rolled through the rolling mill. In this process, the steel is processed into a Z-shaped shape and rolled through multiple passes through different rollers to ensure that the shape and size of the final product meet standard requirements.
Cooling and shaping: After rolling, the steel needs to be cooled to stabilize its structure and properties. At the same time, shaping and trimming are also required to ensure that the product has a smooth surface and accurate dimensions.
Inspection and packaging: The completed steel sheet piles need to undergo strict quality inspection, including inspection of appearance quality, dimensional deviation, chemical composition, etc. Qualified products will be packed and ready to be shipped.
Factory and transportation: The final product will be loaded onto the truck and shipped out of the factory, ready to be shipped to the customer site for use. Care must be taken to protect the product during transportation to avoid damage.
The above is the general production process of Z-shaped steel sheet piles. The specific production process may vary depending on the manufacturer and equipment.
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
|
Product Name
|
Steel Sheet Pile | ||
| MOQ | 25 Ton | ||
| Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. | ||
| Length | 1-12m or as Your Requirement | ||
| Width | 20-2500 mm or as Your Requirement | ||
| Thickness | 0.5 - 30 mm or as Your Requirement | ||
| Technique | Hot rolled or cold rolled | ||
| Surface Treatment | Clean, blasting and painting according to customer requirement | ||
| Thickness tolerance | ±0.1mm | ||
| Material | Q195; Q235(A,B,C,D R); Q345(B,C,D R); Q345QC Q345QD SPCC SPCD SPCD SPCE ST37 ST12 ST15 DC01 DC02 DC03 DC04 DC05 DC06 20#- 35# 45# 50#, 16Mn-50Mn 30Mn2-50Mn2 20Cr, 20Cr, 40Cr 20CrMnTi 20CrMo;15CrMo;30CrMo 35CrMo 42CrMo; 42CrMo4 60Si2mn 65mn 27SiMn ;20Mn; 40Mn2; 50Mn; 1cr13 2cr13 3cr13 -4Cr13; |
||
| Application | It is widely used in small tools, small components, iron wire, siderosphere, pull rod, ferrule, weld assembly, structural metal, connecting rod, lifting hook, bolt, nut, spindle, mandrel, axle, chain wheel, gear, car coupler. |
||
| Export packing | Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required | ||
| Application | Shipbuilding,marine steel plate | ||
| Certificates | ISO,CE | ||
| Delivery Time | Usually within 10-15 days after receipt of advance payment | ||
The height (H) of z sheet pile usually ranges from 200mm to 600mm.
The width (B) of Q235b Z-shaped steel sheet piles usually ranges from 60mm to 210mm.
The thickness (t) of Z-shaped steel sheet piles usually ranges from 6mm to 20mm.
| Section | Width | Height | Thickness | Cross Sectional Area | Weight | Elastic Section Modulus | Moment of Inertia | Coating Area (both sides per pile) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (w) | (h) | Flange (tf) | Web (tw) | Per Pile | Per Wall | |||||
| mm | mm | mm | mm | cm2/m | kg/m | kg/m2 | cm3/m | cm4/m | m2/m | |
| Type II | 400 | 200 | 10.5 | - | 152.9 | 48 | 120 | 874 | 8,740 | 1.33 |
| Type III | 400 | 250 | 13 | - | 191.1 | 60 | 150 | 1,340 | 16,800 | 1.44 |
| Type IIIA | 400 | 300 | 13.1 | - | 186 | 58.4 | 146 | 1,520 | 22,800 | 1.44 |
| Type IV | 400 | 340 | 15.5 | - | 242 | 76.1 | 190 | 2,270 | 38,600 | 1.61 |
| Type VL | 500 | 400 | 24.3 | - | 267.5 | 105 | 210 | 3,150 | 63,000 | 1.75 |
| Type IIw | 600 | 260 | 10.3 | - | 131.2 | 61.8 | 103 | 1,000 | 13,000 | 1.77 |
| Type IIIw | 600 | 360 | 13.4 | - | 173.2 | 81.6 | 136 | 1,800 | 32,400 | 1.9 |
| Type IVw | 600 | 420 | 18 | - | 225.5 | 106 | 177 | 2,700 | 56,700 | 1.99 |
| Type VIL | 500 | 450 | 27.6 | - | 305.7 | 120 | 240 | 3,820 | 86,000 | 1.82 |
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
SY295, SY390 & S355GP for Type II to Type VIL
S240GP, S275GP, S355GP & S390 for VL506A to VL606K
Length
27.0m maximum
Standard Stock Lengths of 6m, 9m, 12m, 15m
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
|
SPECIFICATIONS FOR SHEET PILE |
|
| 1. Size | 1) 400*100 - 600*210MM |
| 2)Wall Thickness:10.5-27.6MM | |
| 3) U type sheet pile | |
| 2. Standard: | JIS A5523, JIS A5528 |
| 3.Material | SY295, SY390, S355 |
| 4. Location of our factory | Shandong,China |
| 5. Usage: | 1)earth-retaining wall |
| 2)structure construction | |
| 3)fence | |
| 6. Coating: | 1) Bared2) Black Painted (varnish coating)3) galvanized |
| 7. Technique: | hot rolled |
| 8. Type: | U type sheet pile |
| 9. Section Shape: | U |
| 10. Inspection: | Client inspection or inspection by 3rd party. |
| 11. Delivery: | Container, Bulk Vessel. |
| 12. About Our Quality: | 1) No damage, no bent2) Free for oiled&marking3) All goods can be checked by third party inspection before shipment |
FEATURES
It has been widely used in the field of foreign engineering, and its design, manufacturing, installation and construction level is also constantly improving. With the continuous increase of various development and construction in our country, the demand for steel sheet piles in site construction is becoming more and more large, and steel sheet piles are more and more in the engineering field.
PACKAGING AND SHIPPING
The use of steel sheet piles in the project can cleverly avoid some difficult to deal with the responsible problems, so that the construction becomes relatively simple, of course, can play a role in shortening the construction period.
Secure the load: Properly secure the packaged stack of sheet piles on the transportation vehicle using strapping, bracing, or other suitable means to prevent shifting, sliding, or falling during transit.
COMPANY STRENGTH
Made in China, first-class service, cutting-edge quality, world-renowned
1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
4. Brand influence: Have higher brand influence and larger market
5. Service: A large steel company that integrates customization, transportation and production
6. Price competitiveness: reasonable price
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
CUSTOMER VISIT PROCESS
When a customer wishes to visit a product, the following steps can usually be arranged:
Make an appointment to visit: Customers can contact the manufacturer or sales representative in advance to make an appointment for the time and place to visit the product.
Arrange a guided tour: Arrange professionals or sales representatives as tour guides to show customers the production process, technology and quality control process of the product.
Display products: During the visit, show products at different stages to customers so that customers can understand the production process and quality standards of the products.
Answer questions: During the visit, customers may have various questions, and the tour guide or sales representative should answer them patiently and provide relevant technical and quality information.
Provide samples: If possible, product samples can be provided to customers so that customers can more intuitively understand the quality and characteristics of the product.
Follow-up: After the visit, promptly follow up on customer feedback and needs to provide customers with further support and services.
FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.
2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.
5.Do you accept the third party inspection?
Yes absolutely we accept.
6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.
